Overview: This dust collector is a large-scale dust removal equipment with high air volume, good dust cleaning effect, high dust removal efficiency, reliable operation, easy maintenance, and small footprint. Applied in industries such as metallurgy, power, chemical, and building materials. It mainly consists of ash hopper, filter chamber, clean air chamber, bracket, lifting valve, and blowing and cleaning device. During operation, dusty gas enters the ash hopper through the air duct. Large particles of dust directly fall into the bottom of the ash hopper...
Tel: +86-513-88755311 88755027
Technical parameters | PPCS(A)128-6 | PPCS(A)128- | PPCS(A)128-10 | PPCA128-2× 6 | PPCA128-2× 7 | PPCA128-2× 8 | PPCA128-2× 9 | PPCA128-2× 10 | PPCA128-2× 11 | PPCA128-2× 12 | PPCA128-2× 13 | PPCA128-2× 14 | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Processing air volume (m3/h) | 67300 | 100900 | 112100 | 134600 | 157000 | 179400 | 201900 | 224300 | 247600 | 269100 | 291600 | 314000 | ||
Filtering wind speed (m/min) | 1.2-2.0 (Select different net filtration wind speeds according to different dust points, see Table 1) | |||||||||||||
Total filtration area (m2) | 935 | 1402 | 1558 | 1869 | 2181 | 2492 | 2804 | 3115 | 3427 | 3738 | 4050 | 4361 | ||
Net filtration area (m2) | 779 | 1246 | 1402 | 1713 | 2025 | 2336 | 2648 | 2959 | 3271 | 3582 | 3894 | 4205 | ||
Number of dust collector rooms (pcs) | 6 | 9 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | ||
Total number of filter bags (pieces) | 768 | 1152 | 1280 | 1536 | 1792 | 2084 | 2304 | 2560 | 2816 | 3072 | 3328 | 3584 | ||
Dust collector resistance (Pa) | 1470-1770 | |||||||||||||
Imported gas dust concentration (g/m3standard) | < 1300 | |||||||||||||
Export gas dust concentration (g/m3standard) | < 0.1 | |||||||||||||
Dust collector can withstand negative pressure (Pa) | 6860 | |||||||||||||
Clear & nbsp;& nbsp; Grey Compressed air |
Pressure (Pa) | (5-7)× 105 | ||||||||||||
Gas consumption (m3standard/min) |
3.6 | 5.4 | 6.0 | 7.0 | 8.3 | 9.5 | 10.7 | 12 | 13.1 | 14.3 | 15.5 | 16.7 | ||
Pulse valve (with solenoid valve) |
Quantity (piece) | 12 | 18 | 20 | 24 | 28 | 32 | 36 | 40 | 44 | 48 | 52 | 56 | |
Specification (inches) | 2 1/2” | |||||||||||||
Lift valve (with cylinder) |
Quantity (piece) | 6 | 9 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | |
Specification (mm) | Lift the valve plate with a diameter of Ø 725 and the cylinder with a diameter of Ø 100 | |||||||||||||
Rigid impeller feeder | Discharge port 300× 300mm, reduction motor power 1.1kw, output 24m3/h | Electric dual plate valve specification 305× 915mm, speed 175r/min, reduction motor model XWD4-7-1/37, power 4kw | ||||||||||||
Snail Spin Conveyor |
Regulations & nbsp; Ge | Diameter of Ø 300, output of 21m3/h | ||||||||||||
Reduction motor | Model XWD2.2-5-1/43, power 2.2kw | |||||||||||||
Air conveying chute | The specification of the inclined groove is 250mm, and the required air volume is 2.0m3/m2breathable layer, with a wind pressure of 6260Pa. The selection of fan and pipeline configuration is the responsibility of the user. If the dust concentration of the imported gas is greater than 700g/m3standard, a dust collector that requires a screw conveyor should be selected | |||||||||||||
Dust cleaning program controller | The input and output voltages are both 220V. The controller is supplied by the manufacturer and detailed information can be found in the controller manual | |||||||||||||
Specification and material of filter bag | Diameter× Length Ф130× 3060mm, polyester needle punched felt weight 450g/m2, usable area 120 ℃ | |||||||||||||
Insulation layer area (m2) | 125 | 196 | 205 | 323 | 247 | 262 | 277 | 292 | 307 | 322 | 337 | 352 | ||
Total weight of equipment (approximately, excluding insulation layer) (kg) | 20100 | 26400 | 28900 | 36600 | 43900 | 50000 | 55400 | 60000 | 65400 | 72000 | 78000 | 84000 |