PPCS96 air box pulse bag dust collector_Jiangsu Pengfei Group Co., Ltd. Products catalog

Product Introduction Notes Technical Parameter

Notes

1. The net filtration area in the table refers to the filtration area of a chamber during dust cleaning
2. The gas consumption in the table refers to the situation of centralized gas supply in the factory. If a separate air compressor is set up, the gas consumption in the table should be multiplied by a factor of 1.3
3. The processing air volume in the table is calculated when the gross filtration wind speed is 1.2m/mm. When the dust concentration at the user's dust source point is less than 30g/m3 (standard) and the net filtration wind speed is unknown, the selection should be made directly according to the processing air volume marked in the table. Generally, the selection steps in this atlas should be followed.

Technical Parameter

Technical parameters			PPCS96-4	PPCS96-5	PPCS96-6	PPCS96-7	PPCS96-8	PPCS96-9	PPCS96-2× 5	PPCS96-2× 6	PPCS96-2× 7	PPCS96-2× 8	PPCS96-2× 9	PPCS96-2× 10
Processing air volume (m³/h)			26800	33400	40100	46800	53510	60100	66900	80700	94100	107600	121000	134500
Filtering wind speed (m/min)			1.2-2.0 (Select different net filtration wind speeds according to different dust points, see Table 1)
Total filtration area (m²)			372	465	557	650	744	836	929	1121	1308	1494	1681	1868
Net filtration area (m²)			279	372	465	557	657	744	836	1028	1215	1401	1588	1775
Number of dust collector rooms (pcs)			4	5	6	7	8	9	10	12	14	16	18	20
Total number of filter bags (pieces)			384	480	576	672	768	864	960	1152	1344	1536	1728	1920
Dust collector resistance (Pa)			1470-1770
Imported gas dust concentration (g/m³standard)			< 1300
Export gas dust concentration (g/m³standard)			< 0.1
Dust collector can withstand negative pressure (Pa)			5000
Compressed air for dust cleaning	Pressure (Pa)		(5-7)× 10⁵
Compressed air for dust cleaning	Gas consumption (m³standard/min)		1.2	1.5	1.8	2.1	2.4	2.7	3.0	3.4	4.2	4.8	5.4	6.0
Pulse valve (with solenoid valve)	Quantity (piece)		4	5	6	7	8	9	10	12	14	16	18	20
Pulse valve (with solenoid valve)	Specification (inches)		2 1/2”
Lift valve (with cylinder)	Quantity (piece)		4	5	6	7	8	9	10	12	14	16	18	20
Lift valve (with cylinder)	Specification (mm)		Lift the valve plate with a diameter of Ø 725 and the cylinder with a diameter of Ø 100
Rigid impeller feeder			Discharge port 400× 400mm, speed 22.5r/min, reduction motor power 1.5kw, output 40m³/h						Discharge port 350× 350mm, speed 24.63r/min, reduction motor power 1.5kw, output 30m³/h, 2 units
Snail Spin Conveyor		Regulations & nbsp; Ge	Diameter of 400, output of 38m³/h						Two units with a diameter of Ø 300. Each unit has a production capacity of 21m³/h
Snail Spin Conveyor		Reduction motor	Model XWD5.5-7-1/59, power 5 5kw						Model XWD2.2-5-1/43, power 2.2kw
Air conveying chute			If the dust concentration of the imported gas is greater than 700g/m³standard, a dust collector with an inclined chute or a larger specification screw conveyor should be selected
Dust cleaning program controller			The input and output voltages are both 220V. The controller is supplied by the manufacturer and detailed information can be found in the controller manual
Specification and material of filter bag			Diameter× Length Ф130× 2450mm, polyester needle punched felt weight 450g/m², usable area 120 ℃
Insulation layer area (m²)			110	120	130	140	150	160	175	210	245	280	315	350
Total weight of equipment (approximately, excluding insulation layer) (kg)			8710	10100	12400	14100	15700	17700	21000	25200	29400	33600	37800	42000